38
Snapshot Tutorial
2. Use [8] and [2] to select the item you want, and use [4] and [6] to
select the setting you want.
This will select one of the Control Panel icons and display its settings.*
3. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can use on-screen menus to configure settings other than those listed
above (page 92).
Using the Control Panel
The Control Panel can be used to configure camera
settings.
1. In the REC mode, press [SET].
• You can also display the Control Panel by pressing
[2].
1
Self-timer (page 39)
2
White balance (page 40)
3
Focus (page 42)
4
ISO sensitivity (page 45)
5
Make-up Level (page 46)
6
EV shift (page 47)
7
Flash (page 48)
8
Metering (page 50)
* Items displayed in the Control Panel depend on the recording mode.
[SET]
[8] [2] [4] [6]
1
5
3
4
7
8
2
6
Control Panel
To Next Page
Loading...
