58
Snapshot Tutorial
10.
Half-press and hold the shutter button to start pre-recording.
A pre-record buffer is continually updated with images as long as the shutter
button is pressed.
• The camera will not emit shutter sounds as it pre-records images.
• Releasing the half-pressed shutter button will cause the contents of the pre-
record buffer to be deleted.
11.
Full press and hold down the shutter button.
This will record the images in the pre-record buffer followed by real-time recorded
images. Shooting of images will continue as long as you depress the shutter or
until the maximum number of images specified by “High Speed CS fps” is
reached.
. Continuous Shutter Precautions
• You can use the Manual Mode while a continuous shutter mode is selected. To do
so, set the mode dial to [A], [S], or [M].
• The greater the number of shots, the longer it takes to save them after shooting is
complete.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• Zoom is disabled during continuous shutter operations.
• When shooting with this function, the snapshot image quality automatically
changes to “Normal”.
• When shooting with this function, exposure and focus for the first image are applied
for successive images as well.
• When shooting with this function, the flash setting automatically becomes
? (Flash Off).
• The following image sizes cannot be selected while shooting with this function:
“3:2”, “16:9”. Entering the High Speed CS mode while any one of these image
sizes is selected will cause the image size setting to change to “16M”
automatically.
• The Triple Self-time cannot be used when shooting with this function.
• The Self-timer cannot be used in the Prerecord CS mode.
• Single SR Zoom and Multi SR Zoom cannot be used when shooting with this
function.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
