56
Snapshot Tutorial
. Shooting with High Speed CS
With High Speed CS, recording continues as long as you
keep the shutter button depressed.
The table below shows the settings that can be specified
for the CS speed and the number of images per High
Speed CS operation.
1. Align the mode dial with [P] (Program Auto).
2. Press [Õ] (Continuous Shutter).
• This will display Š (High Speed CS). If this does not happen, press [Õ]
again.
3. Press [SET].
4. Use [8] and [2] to select the (High Speed CS fps) Control Panel
option.
5. Use [4] and [6] to select the continuous shutter (CS) speed you want.
• Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
6. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option.
7. Use [4] and [6] to select the maximum number of shots and then
press [SET].
8. Press the shutter button the rest of the way and hold it down.
Shooting of images will continue as long as you depress the shutter button or until
the maximum number of images specified by “High Speed CS fps” is reached.
CS Speed
(High Speed CS
(fps))
3 fps, 5 fps, 10 fps, 15 fps, 30 fps
fps = frames per second
Maximum CS
Shots
5, 10, 20, 30
Maximum CS shots
CS speed
High Speed CS icon
To Next Page
Loading...
Need help?
General
Weight and Dimensions
