168
CHAPTER
6
Command
Reference
SAVE#
Function:
["File name"]
Character string
Stores memo data in the DATA BANK on a cassette tape.
Parameter:
File name: 1
~character
numbers
of
character
string~
8.
Can be omitted.
Explanation: ;
I)
Stores all memo data
in
the DATA BANK
on
a cassette tape.
2) Since memo data cannot be stored with SA
VE
or SA VE ALL, always load
memo data with SA VE#.
3)
If
a password has been specified, storing
is
performed with this password.
Therefore, the same password must be specified when the loading
is
per-
formed
by
the
LOAD#
command.
4)
Cannot be executed
in
the
MEMO
IN mode.
Example:
SAVE#
~
SAVE#"CAS
10"~
To Next Page
Loading...