4-7 Convenient Peripherals
Precautions:
Sometimes a program cannot be stored or loaded smoothly.
If
this happens,
check the following items.
• "Error
9"
is
displayed during storing.
[Check point]
Check
if
the computer
is
properly connected to the cassette interface.
• "Error
9"
is
displayed during loading.
[Check points]
If
the tape
is
stretched, replace it with a new one.
If
the head
of
the tape recorder
is
dirty, clean it.
Set the tone control
of
the tape recorder
to
medium.
• No error
is
displayed
but
loading
is
attempted without success.
[Check points]
If
the tape recorder
output
volume
is
low, increase the volume near
MAX.
Check if the
output
standard
of
the tape recorder
is
in accordance with that
of
the cassette interface. See the owner's manual
of
the cassette interface for
the standard.
• Storing and Loading
of
Data in the DA TA BANK
All the data in the DAT A
BANK
can be stored on a cassette tape at once by
using
"SA VE
#"
.
SAVE#
"File name"
Up
to
8 characters.
Up
to
8 characters can be placed inside " " for a file name, the same
as
when a
program
is
stored.
Example:
SAVE#
''MEMO''
~
77
To Next Page
Loading...
Need help?
General
