• When the Vector Editor or VctAns screen is displayed:
Press , select [Define Vector], and then press .
Storing New Data to a Vector Variable
Example 2: To store the three-dimensional vector (1, 2, 3)
1. While the vector calculation screen is displayed, press to display the
vector variable list screen.
2. Select the vector variable (VctA, VctB, VctC, or VctD) to which you want
to store new data, and then press .
• If you selected a vector variable whose status is "None1", advance to
step 4 of this procedure.
• If you selected a vector variable that already has a vector stored to it,
a menu screen will appear. Advance to step 3.
3. Select [Define New], and then press .
4. On the "Vector Dimension?" screen that appears, specify the vector
dimension.
•
To specify three dimensions, perform the steps below.
(1) Select [Dimensions] and then press .
(2) On the menu that appears, select [3 Dimensions] and then press .
5. After the dimension specification is the way you want, select [Confirm]
and then press .
• This displays the Vector Editor.
6. Input the elements of the vector variable.
1 2 3
7. Press , , or to return to the vector calculation screen.
98
To Next Page
Loading...
Need help?
General
