Casio fx-8200 AU - Vector Answer Memory (Vctans)

Note
• Vector variable contents are retained even if you press , change the calculator
app, or turn off the calculator. Executing any one of the operations below causes the
contents of all vector variables to be cleared.
- – [Reset] > [Settings & Data]
- – [Reset] > [Initialize All]
Editing Vector Variable Data
1. While the vector calculation screen is displayed, press
to display the
vector variable list screen.
2. Select the vector variable (VctA, VctB, VctC, or VctD) you want to edit,
and then press .
3. On the menu that appears, select [Edit] and then press .
• This displays the Vector Editor.
4. Use the Vector Editor to edit the elements of the vector.
• Move the cursor to the cell that contains the element you want to
change, input the new value, and then press .
5. Press , , or to return to the vector calculation screen.
Copying Vector Variable (or VctAns) Contents
1. Display the Vector Editor or VctAns screen of the vector variable you
want to use as the copy source.
• To display the Vector Editor, perform steps 1, 2, and 3 under "Editing
Vector Variable Data" (page 99).
• To display the VctAns screen, perform the steps below while the
vector calculation screen is displayed.
– [Vector] > [VctAns]
2. Select the vector variable copy destination.
•
For example, to copy to VctD, perform the following operation: –
[Store] > [VctD].
•
This displays the Vector Editor with the contents of the copy
destination.
3. Press , , or to return to the vector calculation screen.
Vector Answer Memory (VctAns)
Whenever the result of a calculation executed in the Vector app is a
vector, the VctAns screen will appear with the result. The result also will be
stored to a variable named "VctAns".
The VctAns variable can be used in calculations as described below.
99