10-15
3. Input the key operation sequence.
• In this example, we will input a graphing key sequence.
TV@U
(Inputs the graph function.)
Indicates that recording is in
progress.
(DRAW)
(Draws the graph.)
(G-SLV)(E)(°
dx)
(Selects the integration command.)
4. After input is complete, press .
• This will display a comment box.
5. Input any comment text you want about the key operation
sequence.
• You can input up to two lines in the comment box.
6. After inputting comment text, press U to register the n-key operation input.
• This will return to the operation pattern selection screen.
You can now edit the guide by pressing (PLAY) and
selecting the key operation you want to change.
See “Editing a Guide” (page 10-18) for details about editing guides.
S To create a 1-key operation
The following operation assumes that you are continuing from the procedure under “To create
an n-key operation” (page 10-14).
1. On the operation pattern selection screen, press
(1-KEY).
2. Press a key.
• Here we will press U.
• This will display a comment box.
U (Executes the integration command.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
