10-22
2. Press (GUIDE).
• This will display the first key editing screen.
3. Operations from this points are identical to those under “Creating a Guide” (page 10-13) and
“Editing the Guide You Are Creating” (page 10-18).
S Running a Guide
This example shows how to run the guide created under “Creating a Guide” (page 10-13).
1. On the eActivity workspace screen, select the Graph strip and then press U.
• This will display the screen shown to the right.
2. Press the key indicated by the key indicator that appears in the upper or lower right corner
of the screen.
• This will cause the next key to be pressed to appear in
the upper or lower right corner.
3. Perform the key operation in accordance with the keys that appear on the screen.
• Exit Strip ON: U will appear in the upper or lower right
corner when the guide is complete.
• Exit Strip OFF: The strip will be freely usable when the guide is complete. Note, however,
that this operation does not save the strip.
4. If exit strip is turned on, press U.
• This will display the dialog box shown to the right.
• (Yes) ... Exits the strip and returns to the eActivity workspace screen.
• (No) ... Returns to the screen in step 3.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
