Listening to Songs (SONG Mode)
EN-108
2.
Select “Song Type” according to the song you want to play.
(1) Touch the F4 button (STYPE).
(2) Trace the touch ring to select the “Song Type” setting from the following:
“MIDI” … Play MIDI data from the internal memory or a USB flash drive (MIDI Mode)
“Audio(USB Drv)” … Play audio data from a USB flash drive (Audio Mode)
(3) Touch the EXIT button to return to the SONG mode screen.
3.
Trace the touch ring to select the song you want to play.
• For MIDI data and audio data for each song, see “Data Types of Playable Songs” (page
EN-106).
4.
When playing back MIDI data, set the part and tempo to be played back as
needed.
• Touch the top or bottom of the touch ring to select the item whose setting you want to change.
5.
To start playback, touch the a button.
• During playback, the following operations are available:
Touch the F1 button (s): Backs up the song a little.
Touch and hold the F1 button (s): While held down, the song will rewind.
Touch the F2 button (k): Pauses the currently playing song. Touch while paused to resume
playback.
Touch the F3 button (d): Advances the song a little.
Touch and hold the F3 button (d): While held down, the song will fast-forward.
• When the song reaches the end, playback will stop. Touch the a button to stop midway.
Setting item Setting values and descriptions
Part
For user songs and USB flash drive songs
L+R: Plays both parts
L: Plays only the left-hand part
R: Plays only the right-hand part
For MIDI recorder songs
System + Solo: Plays both tracks
System: Plays only the system track
Solo: Plays only the solo track
Tempo Sets the tempo of the song between 20 and 255 (beats/minute)
To Next Page
Loading...
Need help?
General
