USB Flash Drive
EN-145
1.
Touch the FUNCTION button to display the FUNCTION Menu.
2.
Use the touch ring to select “MEDIA” > “LOAD”, then touch the ENTER button.
The “MEDIA LOAD” screen displays a menu for selecting the type of data you want to load.
“USER SONG” … User songs
“MIDI REC SONG” … MIDI recorder songs
“REGIST BANK” … Registration Bank
“ALL” … All user data in the Digital Piano’s internal memory
3.
Touch the top or bottom of the touch ring to select the type of data, a file to load,
then touch the ENTER button.
A screen appears to select which area of the Digital Piano to load.
• If “ALL” is selected, touching the ENTER button immediately displays the confirmation screen
in Step 4 (“Replace?”).
4.
Touch the top or bottom of the touch ring to select the area to load from, then
touch the ENTER button.
The “Sure?” or “Replace?” message appears in the screen confirming whether you want to load
the file.
“Sure?” .............. Appears when there is no data in the load destination.
“Replace?”......... Checks whether you want to overwrite the data, since there is data in the load
destination.
• To exit the operation without loading any data, touch the left of the touch ring (NO).
5.
To load a file into the Digital Piano, touch the right of the touch ring (YES).
“Wait...” is displayed during the loading process. Do not perform any action on the Digital Piano
while this is happening. When loading is complete, “Complete” appears.
• It may take several minutes to load all user data, depending on the size of the data.
Loading USB Flash Drive Data into the Digital Piano’s
Internal Memory
To Next Page
Loading...
Need help?
General
