Changing the Sound During a Performance
EN-72
The two knobs are used by assigning different functions to each. Assignable functions include
modifying tones, adjusting effects, or controlling the volume of specific parts. By turning the knobs, the
parameter values of the assigned functions can be changed in real time while playing.
Under initial default settings, the functions that modifies the frequency characteristics of your
performance sound are assigned to each of the knobs as follows: K1 knob: Cutoff Freq., K2 knob:
Resonance. The operation below shows an example of knob usage under initial default settings.
1.
Rotate the K1 knob.
This temporarily displays the function name “CUTOFF FREQ.” that is currently assigned to the K1
knob. The parameter value changes in accordance with the position of the K1 knob.
2.
Rotate the K2 knob.
This temporarily displays the function name “RESONANCE” that is currently assigned to the K2
knob. The parameter value changes in accordance with the position of the K2 knob.
Using the Knobs
Using the Knobs to Change Parameters
To Next Page
Loading...
Need help?
General
