Recording Performances
EN-113
The MIDI recorder records keyboard performances and pedal operations as MIDI data.
1.
Put the Digital Piano into MIDI Mode.
• Under the initial default settings, the Digital Piano is in MIDI Mode. In this case, proceed to step
2.
(1) Touch the FUNCTION button to display the FUNCTION menu.
(2) Use the touch ring to select “SONG” and touch the ENTER button.
(3) Trace the touch ring to set the “Song Type” to “MIDI” (MIDI Mode).
(4) Touch and hold the EXIT button to exit the setup screen.
2.
If necessary, set tones, effects, tempo, etc. for recording.
• See “Changing the Metronome Settings (Tempo, Beat, Pattern, etc.)” (page EN-81) for beat and
tempo settings, and whether the metronome should sound during recording. To have the
Metronome sound while recording, set “While Recording” to “On” in the “METRONOME” screen.
• A MIDI recorder song has two recording tracks (a system track and a solo track), and some
settings (such as effects) are recorded only on the system track. For what’s recorded on each
track, see “Items Reflected in Contents When Recording to the MIDI Recorder Song” (page
EN-120).
3.
If necessary, select the song number to record to before recording.
• This operation may be omitted.
• If you select a song number that has already been recorded, the previous recording will be
overwritten. Only when you want to intentionally overwrite or select a specific song number,
perform the following operation.
(1) Touch the a button to display the SONG mode screen.
Using the MIDI Recorder to Record Performances
Recording with the MIDI Recorder
To Next Page
Loading...
Need help?
General
