Recording Performances
EN-115
6.
To end recording, touch the 0REC button.
The 0REC button will show a white light once again and the SONG mode screen will appear.
• If you want to immediately play back the recorded MIDI recorder song, touch the a button.
• For more information on playback operations, see “Playing Back MIDI Recorder Songs” (page
EN-118).
• MIDI recorder songs are stored in song numbers 011 to 015, “011 Rec Song 1” to “015 Rec Song 5”
in the internal memory. Up to five songs can be recorded. Each time you record, the lowest song
number that has not yet been recorded is automatically selected. However, please note the following:
– When the SONG mode screen is displayed in step 3 or step 6, and a song number between 011
and 015 is selected, touching the 0REC button to start recording will overwrite the selected song
number.
– If all five songs have been recorded and step 3 is omitted, when the 0REC button is touched in
step 4, “Data Full” will be displayed and recording will not begin. See “Deleting a MIDI Recorder
Song (Entire Song/Individual Tracks)” (page EN-119) to erase songs so that you can record again.
• The FUNCTION button is inoperative during recording. In addition, the function names of the
functions in the F Button Menu that cannot be used are displayed as “----”.
To Next Page
Loading...
Need help?
General
