Reference
EN-197
Auto Wah “Wah” effect that can automatically shift the frequency according
to the input signal level.
Input Level Input Level Adjusts the input level. The input signal can
become distorted when the level of the sound
being input, the number of chords, or the
Resonance value is large. Adjust this parameter
to eliminate such distortion.
000 - 127
Resonance Resonance Adjusts the strength of feedback 000 - 127
Manual Manual Adjusts the wah filter reference frequency. 000 - 127
Depth Depth Adjusts the depth of the wah in accordance with
the level of the input signal. Setting a positive
value causes the wah filter to open in direct
proportion with the size of the input signal,
producing a bright sound. Setting a negative
value causes the wah filter to close in direct
proportion with the size of the input signal,
producing a dark sound.
–64 - 00 - 63
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Modeling Wah Simulates various types of wah pedals. An effect that can
automatically shift the frequency according to the level of the input
signal.
Output Level
Level Adjusts the wah level. 000 - 127
Type Type Selects the wah type. CAE, CRY,
IBZ, VO,
FAT, LIGHT,
7STR, RESO
Manual Manual Adjusts the wah filter reference frequency. 000 - 127
Depth Depth Adjusts the depth of the wah in accordance with
the level of the input signal. Setting a positive
value causes the wah filter to open in direct
proportion with the size of the input signal,
producing a bright sound. Setting a negative
value causes the wah filter to close in direct
proportion with the size of the input signal,
producing a dark sound.
–64 - 00 - 63
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Effect
Description Settings
Display
Parameter
Name
To Next Page
Loading...
Need help?
General
