Reference
EN-227
Limiter Limits the input signal level so it does not rise above a preset
level.
Limit Limit Adjusts the volume level of the limit at which
limiting is applied.
000 - 127
Attack Attack Adjusts the time until the compression effect
starts. A smaller value causes prompt limiter
operation, which suppresses the attack of the
input signal. A larger values delays limiter
operation, which causes the attack of the input
signal to be output as-is.
000 - 127
Release Release Adjusts the time until compression is released
after the input signal drops below a prescribed
level.
000 - 127
Wet Level Wet Level Adjusts the level of the effect sound. Output
volume changes in accordance with the Limit
setting and the characteristics of the input tone.
Use this parameter to correct for such changes.
000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Enhancer Enhances the profiles of the low range and high range of the input
signal.
Low Freq Low Frequency Adjusts the low range enhancer frequency. 000 - 127
Low Gain Low Gain Adjusts the low range enhancer gain. 000 - 127
High Freq High Frequency Adjusts the high range enhancer frequency. 000 - 127
High Gain High Gain Adjusts the high range enhancer gain. 000 - 127
Input Level Input Level Adjusts the input level. 000 - 127
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Phaser Produces a distinctive pulsating, broad sound by using an LFO to
change the phase of the input signal and then mixes it with the
original input signal.
Resonance Resonance Adjusts the strength of feedback. 000 - 127
Manual Manual Adjusts the reference phaser shift amount. –64 - 00 - 63
Rate LFO Rate Adjusts the LFO rate. 000 - 127
Depth LFO Depth Adjusts the LFO depth. 000 - 127
Waveform LFO Waveform Selects the LFO waveform. Sine, Triangle,
Random
Input Level Input Level Adjusts the input level. 000 - 127
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Effect
Description Settings
Display
Parameter
Name
To Next Page
Loading...
Need help?
General
