Operations Common to All Modes
EN-28
3.
Move the cursor ( ) to the item whose value you want to change.
For example, move the cursor ( ) to “Part name and tone number”.
4.
Touch the left or right or trace along the touch ring.
The value at the cursor position (tone number in this example) changes.
• Instead of touching the left or right or tracing along the touch ring, you can use the value list that
appears when you touch the ENTER button. Refer to the following to use this method.
“Navigating the Hierarchy of Setting Items” (page EN-30)
“Using the F Button Menu” (page EN-31)
“Using the FUNCTION Menu” (page EN-33)
Part name and tone number
To Next Page
Loading...
Need help?
General
