Using the Metronome
EN-82
4.
Change the value of the selected setting.
• Trace the touch ring to change the desired setting.
5.
Repeat Steps 3 and 4 as necessary.
■ Tempo Markings
Pattern
If “Guide Type” is “Metronome”:
Sets the metronome’s beat.
If the “Guide Type” is “Drum”:
You can choose any pattern from the list of drum patterns displayed.
For more information, see “Drum Pattern List” (page EN-83).
Volume
Sets the metronome volume relative to the overall volume of the
Digital Piano as a number between 0 (silent) and 127 (maximum
volume).
While Playing
Sets whether the metronome will play a sound (On) or not (Off)
during playback of MIDI data songs in SONG mode (page EN-106).
While Recording
Sets whether the metronome will play a sound (On) or not (Off) while
recording with the MIDI recorder (page EN-113).
Selecting this setting: Sets this tempo (BPM)
Largo 46
Lento 52
Adagio 56
Andante 72
Moderato 96
Allegretto 108
Allegro 132
Vivace 160
Presto 184
Setting item Setting value and description
Bell Off Plays a click sound on every beat.
1 Beat Plays a bell sound on every beat.
2 Beat to 9 Beat
Sets the number of beats between 2 and 9.
Plays a bell sound on the first beat and a
click sound on the remaining beats.
To Next Page
Loading...
Need help?
General
