Reference
EN-182
Ring Modulator Multiplies the input signal with an internal oscillator signal to
create a metallic sound.
OSC Freq OSC Frequency Sets the reference frequency of the internal
oscillator.
000 - 127
Rate LFO Rate Adjusts the LFO rate. 000 - 127
Depth LFO Depth Adjusts the LFO depth. 000 - 127
Tone Tone Adjusts the timbre of the ring modulator input
sound.
000 - 127
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Delay Delays the input signal and feeds it back to create a repeating
effect.
Time Delay Time Adjusts the total delay time in 1 ms units. 0001 - 1099
L.Time Ratio Delay Ratio L Adjusts the ratio of the left channel relative to
the total delay time.
000 - 127
R.Time Ratio Delay Ratio R Adjusts the ratio of the right channel relative to
the total delay time.
000 - 127
L.Level Delay Level L Adjusts the level of the left channel. 000 - 127
R.Level Delay Level R Adjusts the level of the right channel. 000 - 127
FeedbackType
Feedback Type Selects the feedback type.
Stereo: Stereo feedback
Cross: Cross feedback
Stereo, Cross
Feedback Lvl
Feedback Adjusts the feedback amount. 000 - 127
High Damp High Damp Adjusts the high-range damp. A smaller number
increases damping.
000 - 127
Tmpo Sync Delay Tempo
Sync
Specifies how the actual total delay time is
synced with tempo.
Off: Uses Delay Time value.
1/4 to 1: Uses value in accordance with number
of beats.
Off, 1/4, 1/3,
3/8, 1/2, 2/3,
3/4, 1
Input Level Input Level Adjusts the input level. 000 - 127
Dry Level Dry Level Adjusts the level of the direct sound. 000 - 127
Wet Level Wet Level Adjusts the level of the effect sound. 000 - 127
Effect
Description Settings
Display
Parameter
Name
To Next Page
Loading...
Need help?
General
