Casio TK-6500 - ARCNET In-line Circuit

- 25 -
2. ARCNET In-line circuit
The In-line circuit is as follows:
Mount the I/O PB14 option board to the TK-6500 as shown below. Then, fix the In-line
cable connector between the connector plate and I/O PB14.
ARCNET In-line circuit
board I/0 PB-14
LOWER CASE
TK-6500
Mount I/O PB14 by
2 screws.
Connect the cable
between Main PCB
and I/O PB14.
The I/O PB14 option board circuit is as follows: