- 32 -
3) Print aging test (Slip printer)
This test will check the slip printer continuously until pressing some key button or turn off
the mode switch.
Operation : n3 n2 n1 Y 1 2 #2 Key
Y: 0= Normal print
1= Continuously print
n1: 0= Display test pattern
1= All dots and segment will light on.
n2: 0= Print R/J printer
1= Non print R/J printer
n3: 0= Port selection Com2
1= Port selection Com3 (Do not select for TK-6000.)
4) Print aging test (Kitchen printer)
When the machine is opened for the kitchen printer port with connection of the kitchen
printer, the kitchen printer will print by the same command of R/J printer aging test.
[Open command]
Operation : s b 1 9 2 0 7 #2 Key
b: 0= 19,200bps 1= 9,600bps 2= 4,800bps 3= 2,400bps
s: 0= Com1 1= Com2 2= Com3 (Do not select for TK-6000.)
[Close command]
Operation : 2 9 2 0 7 #2 Key
2) Print aging test (R/J printer)
This test will check the R/J printer continuously until pressing some key button or turn off
the mode switch.
Operation : n1 Y X 2 #2 Key
X: 0= Print 45 times test pattern without paper cut in a minute.
1= Print 15 times test pattern with paper cut in a minute.
Y: 0= Normal print
1= Continuously print
n1: 0= Display test pattern
1= All segment will light on.
[PRINT] [DISPLAY]
Segment display (Test pattern)
To Next Page
Loading...
Need help?
General
