Casio XJ-UT312WN User Manual

19
The projector’s exhaust vents and the area around the vents become very hot during operation, and
will still be hot immediately after turning off the projector. When moving the projector, be sure to first
turn off power and unplug its power cord from the power outlet. Hold the projector as shown in the
illustration below.
Precaution when Handling the Projector after Use
XJ-UT Series XJ-F Series

Casio XJ-UT312WN Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	0.06 - 0.4 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 91 kHz
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	50 - 110 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-5 - 5 °
Noise level	37 dB
Password protection	Yes
Light source type	Laser/LED hybrid
Service life of light source	20000 h
Focus	Manual
Offset	70 %
Fixed focal length	4.2 mm
Aperture range (F-F)	2.3 - 2.3
Full HD	-
Supported video modes	480i, 480p, 576i, 576p, 720i, 720p, 1080i, 1080p
Analog signal format system	NTSC, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1920 x 1200 (WUXGA)
HDMI connector type	Full-size
Serial interface type	RJ-45, RS-232C
USB 2.0 ports quantity	2
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cables included	AC
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.23 W
Power consumption (typical)	170 W
Built-in display	No
Placement	Ceiling
Product type	Ultra short throw projector
Product color	White
Market positioning	Short throw
Cable lock slot type	Kensington
RMS rated power	16 W

Weight and Dimensions

Depth	333 mm
Width	338 mm
Height	141 mm
Weight	5900 g