Casio XJ-UT312WN User Manual

41
Use the procedure below to change the input source manually.
1. Press the [INPUT] key to display the input menu.
2. Use the [INPUT], [], and [] keys to select the name of the input source you
want, and then press the [ENTER] key.
 Note that even if you do not press the [ENTER] key, the projector will automatically switch to
the input source you selected after about three seconds.
 The name of the input source you selected will appear in the upper right corner of the
projection screen for a few seconds.
 The message “No signal input” will appear if an input source cannot be found.
Selecting an input source causes the projector to output the image from the image input terminal that
corresponds to the input source, and the audio from the audio input terminal. The relationship
between input sources and terminals is shown in the table below.
Changing the Input Source Manually
Relationship Between Image Input and Audio Input
Input Source Image Input Terminal (Fixed) Audio Input Terminal (Initial Default)
Computer (1/2)*
1
COMPUTER IN (1/2)*
1
AUDIO IN (1/2)*
1
Video VIDEO AUDIO IN R/L
HDMI (1/2)*
1
HDMI (1/2)*
1
HDMI (1/2)*
1
CASIO USB Tool*
2
USB-A (1/2)*
1
AUDIO IN 1 (May be AUDIO IN, depending on the
model.)
Network*
2
USB-A (1/2)*
1
*
3
or LAN USB-A (1/2)*
1
*
3
or LAN (Network AUDIO)
Templates (Projects a projector built-in image.) AUDIO IN 1 (May be AUDIO IN, depending on the
model.)
*1 The number of inputs (input terminals) depends on your projector model.
*2 Network models only
*3 YW-41 wireless adapter connection is required. See “Connecting a Wireless Adapter” (page 32).

Casio XJ-UT312WN Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	0.06 - 0.4 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 91 kHz
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	50 - 110 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-5 - 5 °
Noise level	37 dB
Password protection	Yes
Light source type	Laser/LED hybrid
Service life of light source	20000 h
Focus	Manual
Offset	70 %
Fixed focal length	4.2 mm
Aperture range (F-F)	2.3 - 2.3
Full HD	-
Supported video modes	480i, 480p, 576i, 576p, 720i, 720p, 1080i, 1080p
Analog signal format system	NTSC, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1920 x 1200 (WUXGA)
HDMI connector type	Full-size
Serial interface type	RJ-45, RS-232C
USB 2.0 ports quantity	2
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cables included	AC
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.23 W
Power consumption (typical)	170 W
Built-in display	No
Placement	Ceiling
Product type	Ultra short throw projector
Product color	White
Market positioning	Short throw
Cable lock slot type	Kensington
RMS rated power	16 W

Weight and Dimensions

Depth	333 mm
Width	338 mm
Height	141 mm
Weight	5900 g