Casio XJ-UT312WN - Troubleshooting Common Issues; Operation Indicator Meanings

66
Troubleshooting
The color and on/off/flashing status of the indicators let you know the current operational status of the
projector. The table below shows what the indicators look like when operation is normal.
Note
 The POWER/STANDBY indicator will flash green if the projector is turned on but the projection
light has been turned off by Auto Projection Off (page 43).
Normal Operation Indicators
■ : Lit ★ : Flashing
When the indicators appear like this:
It means this:
XJ-UT Series XJ-F Series
POWER/
STANDBY
LIGHT TEMP
POWER/
STANDBY
STATUS
The projector has just been plugged into a
power outlet. Wait until the projector enters the
standby state (see below) before trying to turn
on power.
■■■■■
Red Amber Amber Amber Amber
■■Standby state: The AC power cord is plugged in
and the projector is in standby.
Red Red
XJ-UT312WN/XJ-UT352WN XJ-F21XN/XJ-F211WN
Projector is warming up after being turned on.
★■■★■
Green Amber Amber Green Amber
XJ-UT352W XJ-F11X/XJ-F101W
★■ ★■
Green Green Green Green
■■ ■■Projector is on and standing by for use.
“On” is selected for the projector’s “Light
Control” setting.
Green Green Green Green
■■Projector is on and standing by for use.
“Off” is selected for the projector’s “Light
Control” setting.
Green Green
★ 3 ■■ ■★ 3 ■■
Projector is performing an internal process to
prepare for network system startup (network
models only).
Green Amber Amber Green Amber
★★Projector is performing internal power down
processes.
Red Red