Casio XJ-UT312WN User Manual

64
Using the Password Feature
Note the following precautions whenever you use the password feature.
 The password feature protects against unauthorized use of the projector. Note that it is not an anti-
theft measure.
 You will need to enter the initial factory default password the first time you use the projector after
turning on the password feature. Change the initial factory default password to a different one of
your choice as soon as possible after turning on the password feature.
 The remote controller is required to input the password. Take care to avoid misplacing the remote
controller. Replace the remote controller batteries as soon as possible after they start to go low.
 When inputting the password, the remote controller ID and the projector ID must be the same, or
either the remote controller ID or projector ID must be set to “All”. For more information, see
“Configuring Remote Control ID and Projector ID Settings” (page 52).
 You will not be able to use the projector if you forget its password. We strongly suggest that you
keep a written or other type of record of the password so you can look it up when necessary.
If you forget your password...
You will need to bring the projector and valid identification (original or copy of your employee I.D.,
driver’s license, etc.) to a specified repair service provider. Note that you will be charged to have the
password cleared. Having your password cleared using the procedure described above will return all
of the settings of your projector, except for the Light Time, to their initial factory defaults.

Casio XJ-UT312WN Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	0.06 - 0.4 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 91 kHz
Projection technology	DLP
Contrast ratio (typical)	20000:1
Screen size compatibility	50 - 110 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-5 - 5 °
Noise level	37 dB
Password protection	Yes
Light source type	Laser/LED hybrid
Service life of light source	20000 h
Focus	Manual
Offset	70 %
Fixed focal length	4.2 mm
Aperture range (F-F)	2.3 - 2.3
Full HD	-
Supported video modes	480i, 480p, 576i, 576p, 720i, 720p, 1080i, 1080p
Analog signal format system	NTSC, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1920 x 1200 (WUXGA)
HDMI connector type	Full-size
Serial interface type	RJ-45, RS-232C
USB 2.0 ports quantity	2
S-Video inputs quantity	0
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cables included	AC
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.23 W
Power consumption (typical)	170 W
Built-in display	No
Placement	Ceiling
Product type	Ultra short throw projector
Product color	White
Market positioning	Short throw
Cable lock slot type	Kensington
RMS rated power	16 W

Weight and Dimensions

Depth	333 mm
Width	338 mm
Height	141 mm
Weight	5900 g