CASTLE TSM-21 - Dry Cycle Testing; Dry Test TSM-21; Diagnostic Descriptions; Clamp Operation

Table of Contents
1 .............................................................................................................................4 INTRODUCTION
1.1
........................................................................................................5 HOW TO USE THIS MANUAL
2 ...................................................................................................6 DRY CYCLE TESTING 21.95
2.1
..................................................................................................................................6 PURPOSE
2.2 DRY TEST TSM-21...................................................................................................................6
3 DEFINITIONS .................................................................................................................................9
4 DIAGNOSTIC DESCRIPTIONS....................................................................................................11
4.1
CLAMP OPERATION..................................................................................................................11
4.2 ROUTER OPERATION................................................................................................................13
4.3 DRILL OPERATION....................................................................................................................15
4.4 OVERALL MACHINE OPERATION AND POCKET ADJUSTMENT.......................................................16
5 PROCEDURES.............................................................................................................................18
5.1
CLAMP FOOT PAD OR CYLINDER REPLACEMENT 21.01 ...........................................................18
5.2
UNCLOGGING THE CLAMP SOLENOID 21.10 ..........................................................................19
5.3
CLAMP SOLENOID CHECK
21.11 ........................................................................................21
5.4
CLAMP CYLINDER CHECK 21.12 .........................................................................................23
5.5
CLAMP EXHAUST CHECK 21.13............................................................................................24
5.7
ROUTER MOTOR OPERATION
21.20 ...................................................................................26
5.8
ADJUSTING THE WEB, ROUTER STOP PLATE 21.21 ...............................................................28
5.9
ROUTER STOP SWITCH (NC) 21.22 ....................................................................................29
5.10
UNCLOGGING THE ROUTER SOLENOID 21.30 ........................................................................31
5.11
ROUTER CHECK SOLENOID 21.31.......................................................................................32
5.12
ROUTER FEED RATE ADJUSTMENT 21.32 .............................................................................33
5.13
DRILL MOTOR OPERATION
21.40 .......................................................................................35
5.14
DRILL SETTINGS AND BIT DEPTH 21.41...............................................................................36
5.15
DRILL SINGLE COIL BAR SPRING 21.42...............................................................................38
2.3 MANUAL OVERRIDE OF SOLENIOIDS............................................................................................8
Castle Inc
TSM-21 Diagnostic Manual Parker/Humphrey Solenoids
Page 2 of 67