10 Appendix E – Index
Page Section
Air
Pressure Regulator, Setting…………………………………………………. 56 21.90
Air Supply, Attaching……………………………………………………………... 60 21.92
Clamp Cylinder, Air Line Check……………………………………………........ 23 21.12
Clamp Foot Pad, or Cylinder Replacement……………………………………. 18 21.01
Clamp Solenoid, Function Check…………………………………………….…. 21 21.11
Clamp Solenoid, Unclogging……………………………………………………. 19 21.10
Control Box Works, Reference, Appendix C & E.........................……..…. 61 21.93
Drill Motor Operation……………………………………………………………... 35 21.40
Drill Settings and Bit Depth…………………………………………………...…. 36 21.41
Drill Single Coil Bar Spring………………………………………………………. 38 21.42
Drill Solenoid, Function check…………………………………………………... 43 21.51
Drill Solenoid, Unclogging……………………………………………………….. 41 21.50
Drill Stop Switch, normally closed (NC)……………………………………...... 39 21.43
45
21.60
Drive Cylinder, Check ……………………………………………………….......
48 21.61
Dry Cycle Testing……………………………………………………………...... 6 21.95
Foot Switch, normally open (NO)………………………………………………. 50 21.80
Machine Safety, Appendix A…………………………………………………... 61 21.96
Pilot Hole, Alignment…………………………………………………………….. 49 21.72
TSM-21 Diagnostic Manual Parker/Humphrey Solenoids
Solenoid Exhaust Muffler, Check...……
………………….…………………..