Table 17: Accessory Part Numbers
MSD Secondary Enclosure
kit
Enclosure IP66, NEMA 4, Clear hinged locking lid with
DIN rail with 3 Cable glands
Power Supply 100-264Vac to
24Vdc 1A DIN Rail mount
Power supply 110Vac – 24Vdc
PSD Belt Clip Back mount open face
Battery Charger Single Slot
PSD Two-hour Battery Charger 110v-240Vac Single Slot
PSD Two-hour Battery Charger 110v-240Vac Six Slot
Label sheet, multi-color logo
Label sheet with 6 different color replacement logos for
easy identification of the PSD
Installation and operation manual
Installation and operation manual
User Manual V2, Portuguese
Installation and operation manual, Brazilian
Installation and operation manual, European
Installation and operation manual, Mexican
Table 18: Example MSD & PSD Part Numbers
PSD version 2, for Band B (433-434), Red
PSD version 2, for Band F (902-927), Yellow
PSD version 2, for Band D (450-470), Green
PSD version 2, for Band J, Black
MSD version 2, for Band D, No Bus
MSD version 2, for Band B, PROFINET bus
MSD version 2, for Band D, EtherNet/IP bus
Table 19: Example Parts needed to build a System
PSD version 2, for Band B (433-434), Red
MSD version 2, for Band B, PROFINET bus
Full Antenna Kit, Bands A and B
One needed per installation
MSD Secondary Enclosure kit
If not in client’s enclosure
Power Supply 100-264Vac to 24Vdc 1A DIN Rail mount
Label sheet, multi-color logo
If another color logo is wanted.
To Next Page
Loading...