1. Introduction
This manual provides guidance to installers and users of the Cattron Safe-E-Stop Personal Safety System.
1.1 Terminology
The following represent important acronyms and long form used in this document:
Personal Safety Device (the unit worn by a machine operator)
Machine Safety Device (the unit connected into the hard-wired E-Stop wiring and monitoring
systems)
Personal Safety System (the entire E-Stop System)
Programmable Logic Controller
The Primary address used by the system to ensure adjacent systems is unique and will not cross talk
The appended address used to identify specific PSDs within a system
A loss of RF communication between PSD and MSD
Associating a PSD with an MSD and placing into operation as an active E-Stop device
Disassociating a PSD from an MSD and removing from an active E-Stop group
Deutsches Institut fur Normung, i.e. German Institute for Standardization.
To Next Page
Loading...