CEMB N500 - Default Chapter; Table of Contents

Contents 1
N500 rev. 3.1 Contents
Chapter 1 - General description
¾ Standard accessories ……………………………… 1 - 1
¾ Optional accessories ……………………………… 1 - 2
¾ Connections ……………………………………… 1 - 2
¾ Battery ……………………………………………... 1 - 3
¾ General advice ……………………………………… 1 - 4
Chapter 2 - General layout
¾ Keys/buttons on the control panel ………...…...……... 2 - 1
¾ General purpose functions …………….…..…… 2 - 4
- Functions associated with measuring phase………. 2 - 4
- Function "Other functions …" ………….…... 2 - 5
- Functions operating on graphs ………….…... 2 - 5
- To save measurements ……………………... 2 - 9
- To capture and save displayed images ………….… 2 - 10
Chapter 3 - Home screen (menu)
Chapter 4 - Setup mode
¾ Sensor setup …………………………………..…. 4 - 1
¾ General setup ………………………………..……. 4 - 3
Chapter 5 - Vibrometer mode
¾ Vibrometer setup ……………………………….….…. 5 - 1
¾ Vibrometer – Measurement screen…………………….. 5 - 3
¾ Monitoring in time .……………………….……. 5 - 4
¾ Monitoring in speed ……………………….…….. 5 - 5
Chapter 6 - FFT (Fast Fourier Transform) analyzer mode
¾ FFT Setup ……………………………………..………. 6 - 1
¾ Spectrum analysis (FFT) ……………………..………. 6 - 4
¾ Waveform function ……………………..………. 6 - 6
¾ Trigger Setup …………………………..…………. 6 - 6