4.6.1. One to One
4.6.2. One to Many
4.6.3. Implementing Further I / O Links
4.6.4. Output State
4.6.5. Modes of Operation for the WiZo Output
4.6.6. Removing an IO Link
4.6.7. Removing a Device from a Network
4.7. Supervision Mode
4.7.1. SupervisionModeNotication
4.7.2. Removing I/O Links while in Supervision mode
5. SPECIFICATIONS
6. INSTALLATION
6.1. Prepare for Installation
6.2. Potential Applications
6.3. Troubleshooting
6.3.1. Weak Signal
6.3.2. I/O
7. WARRANTY INFORMATION
8. APPENDIX
8.1. Wiring a G-ULTRA into a D-Series Controller via a WiZo
8.2. Wiring a G-ULTRA into a Electric Fence Controller via WiZos
8.3. Wiring a G-ULTRA into an Alarm System via WiZos
Page 21
Page 21
Page 22
Page 23
Page 24
Page 24
Page 25
Page 26
Page 26
Page 26
Page 27
PAGE 28
Page 28
PAGE 29
Page 29
Page 29
Page 30
Page 30
Page 30
PAGE 31
PAGE 32
Page 32
Page 33
Page 34
CONTENTS
Icons used in this manual
This icon indicates tips and other information that could be useful during the
installation.
This icon denotes variations and other aspects that should be considered during
installation.
note of critical aspects that MUST be adhered to in order to prevent
injury.
To Next Page
Loading...