Cessna T182 Series User Manual

MODEL 182 & T182 SERIES SERVICE MANUAL
THREADED
STRAIGHT FITTING
TORQUE
VALUE (RIGID
TUBE)
FLARED END
STRAIGHT
END
TUBE ALUMINUM
ALUMINUM STEEL 6061-0
ALUMINUM STEEL 6061-T(X) ALUMINUM
OUTSIDE On Oxygen Lines 5052-0 ALUMINUM w/ steel sleeve
DIAMETER Torque-Limits
Torque-Limits
Torque-Limits Torque-Limits
Torque-Limits
Torque-Limits
in-lbs. in-bs.
inlbs. in-lbs.
in-lbs. in-bs.
MIN.
MAX. MIN. MAX.
MIN. MAX. MIN.
MAX. MIN. I
MAX. TUBE WALL MIN.
MAX.
18
20
30 45 55
316
90 100
30 40 90
100 0.028
45 55
14 40
65
135
150 40
65 135
150 0.022
80
105
0.028
80
105
0.035
80
105
0.049 90 115
516 60 80 100
125 180 200 60 80 180
200 0.028 80 105
0.035 80 105
0.042 125 175
38 75 125
270 300 75 125
270 300 0.028 125 175
0.035 125 175
0.049 125 175
12 150 250
450 500 150 250 450
500 0.028 135 180
0.035 200 300
0.049 400 500
0.058
400
500
0.065
400
500
58
200 350 700 800
200 350 700 800 All
500 600
34 300
500 1100 1150 300
500 1100 1150 All 600
700
1 500
700 1200 1400 500
700 1200 1400 All 1000
1300
1-1 4 600 900 1300
1450 600 900 1300 1450
All 1300 1500
1-1 2
600 900 1350 1500
600 900 1350 1500 All
1400 1700
2
600
900 1500 1700
Table 1-4. Torque Values - Straight Threaded Fittings (Line)
1-8. SAFETYING
PROCEDURES.
The use of safety
2. Copper that
is cadium-plated and
dyed yellow
wire, cotter pins,
lockwashers, and self-locking nuts
is used for shear and seal wiring applications.
is to prevent relative movement of critical
components (a) Shear applications
are those where it is
subject to vibration, torque, tension,
etc., which could necessary to break or
shear wire to permit operation
cause attaching
parts to be broken, loosened, and/or
or actuation of emergency devices.
detached. (b) Seal applications are where wire is used
with a lead
seal to prevent tampering
or use of a
1-9. SAFETY WIRE PROCEDURES.
device
without indication.
a. Identification. Lockwire
comes in three
types 3.
Aluminum Alloy (Alclad
5056) is dyed blue
which are identified
by size and color.
The three types
and is used exclusively
for safety-wiring magnesium
are classified
by
use.
parts.
1. Inconel
and Monel wire is
used for general
4. Size of wire
is dependent on material
and
lockwiring
and is identified
by a natural
wire color.
purpose of installation.
(a) Inconel can withstand
temperatures up
to (a) 0.020-inch
diameter copper
wire should be
1500°F.
used for
shear and seal application.
(b) Monel can withstand
temperatures up
to (b)
0.020-inch diameter wire
may be used to
800°F.
lockwire
parts
with tie
holes smaller
than
0.045
in-
1-8 Revision 1

Cessna T182 Series Specifications

General

Engine Type	Lycoming IO-540-AB1A5
Horsepower	230 hp
Seating Capacity	4
Service Ceiling	18, 100 feet
Takeoff Distance	1, 600 feet
Landing Distance	1, 350 ft
Type	Single-engine
Max Takeoff Weight	3, 100 lb
Wingspan	36 ft
Length	29 ft
Height	9 feet 3 inches
Fuel Capacity	92 US gal (348 L)