11.5.2 Deleting individual locking media authorisations
If you administer your OMEGA FLEX system exclusively with master media, you can only delete
individual authorised locking media if you are in possession of the corresponding locking medium. If
the locking medium is no longer present, you must delete the authorisations for all locking media,
see "Loss of a locking medium" on page50
A locking medium can only be deleted from a locking device using the same Program-Master that
was used to authorise it.
Required:
l
The locking medium for which the authorisation should be deleted
l
The Program-Master with which the locking medium was authorised
Procedure:
Page 64 of 83 Wide shield replacement handle set ILS-I
11.5 Locking media
Overview: Use of master media
Help & troubleshooting Technical data Maintenance & disposal Operation Administration Assembly Basic information
To Next Page
Loading...
