EasyManua.ls Logo

CF 400 CL - Погружение Робота-Очистителя

CF 400 CL
185 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
177
APPENDIXPIÈCES DÉTACHÉESИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
ПОГРУЖЕНИЕ РОБОТА-ОЧИСТИТЕЛЯ
При опускании робота-очистителя в бассейн нижняя часть робота должна быть
обращена к стенке бассейна. Возьмитесь за рукоятку и опустите робот в воду. В то же
время включите выключатель, и робот-очиститель начнет медленно выпускать воздух, и
через 30 секунд начнет работать (воздух в роботе-очистителе должен быть полностью
выпущен, иначе воздух повлияет на нормальную работу робота). Дайте роботу-
очистителю естественным образом опуститься на дно бассейна.
Когда робот-очиститель завершит очистку, он автоматически прислонится к стенке
бассейна.
Извлеките робот-очиститель из воды с помощью крюка.
Caution
1.When putting the cleaner into the swimming pool, the bottom of the
cleaner shall face the pool wall, hold the handle and press the cleaner into
the water. At the same time, turn on the switch, and the cleaner will slowly
discharge the gas, and after 30s, it starts to work (The gas in the cleaner
must be completely discharged, otherwise gas will affect the normal work
of the machine). Make the machine naturally sinks to the bottom of the
pool.
2. When the cleaner completes the cleaning, it will automatically lean
against the pool wall. Take out the machine with hook.
05

Table of Contents

Related product manuals