28
Bring Tools and Materials
In addition to the CPE250-CMT kit, the site construction team needs:
• Digging tools (shovel, spade, etc.)
• Materials to prepare the form for pouring concrete
• Concrete as specified by site drawings
• Rebar as specified by site drawings
• 24 mm (15/16 in) wrench (x2)
• Pliers to adjust the guide fingers on the CMT conduit openings (if needed)
• Level
• Cut-resistant gloves
• Conduit, ducting, or armored cable in the amounts and types specified by site drawings, that
complies with local code (see the rest of this document for conduit sizes and routing)
To Next Page
Loading...
