Receiving Your UltraDoser 2K
The UltraDoser 2K is designed for variable speed filling lines up to 2000 bottles (or containers) per
minute (under specific conditions). It will compensate for changes in line speed, ramp up, and ramp down
conditions.
Unpacking the UltraDoser 2K
The UltraDoser 2K will arrive in a specially designed shipping crate. If the system is intended to be
moved from one location to another, storing the crate for future use is ideal.
Upon arrival of the UltraDoser 2K, it is advised to immediately inspect for any signs of damage. If any
damage occurred in shipping, claims must be filed with the shipping carrier immediately prior to
unpacking the UltraDoser 2K.
While unpacking the crate, all contents should be carefully inspected. Things to check for upon arrival
include:
Dents in the UltraDoser unit
Male and female bayonets should be protected
Proper number of bayonet clamps/flanges and o-rings (one set for every female bayonet)
Any other components that were defined to ship loose
If there are any pieces listed on the Pack Slip and/or Materials List not in the shipping crate please contact
Chart immediately at +1 800.371.3303.
CAUTION: When removing the UltraDoser unit from the crate, gently set it on the ground. Do not drop
the UltraDoser unit! When transporting the UltraDoser unit through the facility, be sure to carry with
care. Take care not to run into walls or drag the UltraDoser unit on the ground.
Prior to installation, the UltraDoser 2K should be stored in a location that will prevent dirt, water or other
debris from getting inside the system. Similarly, it should be stored in a place that is generally out of the
way of frequent traffic to reduce the risk of damage. Chart recommends storing the system in the crate
when not in service.
To Next Page
Loading...
