Chattanooga Intelect Mobile 2 User Manual


APPENDIX
EN
|
Intelect
®
Mobile 2 ELECTROTHERAPY User Manual
ELECTROMAGNETIC COMPATIBILITY EMC TABLES CONTINUED
Recommended separation distances between portable and mobile RF communications equipment and the Intelect
®
Mobile 
The Intelect
®
Mobile  is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Intelect
®
Mobile  can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and
the Intelect
®
Mobile  as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
P (W)
Separation distance according to frequency of transmitter
d (m)
 kHz to  MHz
d =
[
3,5
]
√P
V
1
(where V = V)
 MHz to  MHz
d =
[
3,5
]
√P
E
1
(where E = V/m)
 MHz to , GHz
d =
[
7
]
√P
E
1
(where E = V/m)
, , , ,
, , , ,
 , , ,
 , , ,
   
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is aected by absorption and reflection from structures, objects and people.

Chattanooga Intelect Mobile 2 Specifications

General

Brand	Chattanooga
Model	Intelect Mobile 2
Category	Medical Equipment
Language	English