Health and Safety
Information
Read these warnings before setting up or using the appliance.
Warning - Do not block air vents. A minimum
1/2-inch clearance is required.
Warning - This appliance does not contain any
user-serviceable parts. Do not remove any covers
or attempt to gain access to the inside of the
product. Opening the device or modifying it in any
way has the risk of personal injury and will void
your warranty. The following instructions are for
trained service personnel only.
Warning - Before using fiber optic ports, you must
install the appropriate UL approved Laser Class 1
Transceivers, rated 3.3Vdc, maximum 1W in the
ports.
To reduce potential safety issues with the DC power source,
only use one of these:
• The AC adapter supplied with the appliance
• A replacement AC adapter supplied by Check Point
• An AC adapter purchased as an accessory from Check
Point
To Next Page
Loading...
