Check Point 770 - Deleting a Locally Defined Administrator; Configuring Local Users

96
Deleting a Locally Defined
Administrator
To delete a locally defined administrator:
1.
Go to Device > Administrators.
2.
Select the administrator and click Delete.
3.
Click Yes in the confirmation window.
Note - You cannot delete an administrator who is logged in.
Configuring Local Users
User profiles define how users can operate within the network:
• The time frame that users can access the network
• If users can work remotely
To add a new local user:
1.
Go to Users & Objects > User Awareness.
2.
Click On.
3.
Click Users.
4.
Click New.
5.
Enter User name, Password and Comments (optional).
Note - You cannot use these characters in your password {
} [ ] ` ~ | ’ "
6.
For temporary or guest users, click Temporary User.
Enter the expiration date and time.
7.
To give remote access permissions, select Remote Access
permissions.