To change the language of the WebUI application:
Select the language link at the top of the page.
Note that only English is allowed as the input language.
Authentication Details
In the Authentication Details page, enter the required details
to log in to the Check Point 770/790 Appliance WebUI
application or if the wizard terminates abnormally:
• Administrator Name - We recommend that you change the
default "admin" login name of the administrator. The name
is case sensitive.
• Password - A strong password has a minimum of 6
characters with at least one capital letter, one lower case
letter, and a special character. Use the Password strength
meter to measure the strength of your password.
Note - The meter is only an indicator and does not enforce
creation of a password with a specified number of
character or character combination. To enforce password
complexity, click the check box.
• Confirm Password - Enter the password again.
• Country - Select a country from the list (for wireless
network models).
To Next Page
Loading...
