Check Point 770 - Backup and Restore

76
If Internet connectivity is configured:
1.
Click Activate License
2.
Browse to http://register.checkpoint.com/cpapp
3.
Complete these fields:
• MAC address
• Registration key
4.
Select Hardware Platform.
5.
In Hardware Model, select Check Point 770/790
Appliance.
6.
Click Activate License.
You are notified when you successfully activate the appliance. If
changes are made to your license, click Reactivate to get the
updated license information.
If your license is expired:
Contact your local Check Point representative or visit
www.checkpoint.com/smb (http://www.checkpoint.com).
To pull a new license:
Go to User Center > License > Reactivate.
Backup and Restore
See Check Point 600/700 Appliance Administration Guide for
backup and restore instructions.