• DNS Server (Static IP and Bridge connections) - Enter
the DNS server address information in the relevant
fields. For DHCP, PPPoE, PPTP, L2TP, Analog Modem,
and Cellular Modem, the DNS settings are supplied by
your service provider. You can override these settings
later in the WebUI application, under Device > DNS.
We recommend that you configure the DNS since Check
Point 770/790 Appliance needs to perform DNS resolving
for different functions. For example, to connect to Check
Point User Center during license activation or when
Application Control, Web Filtering, Anti-Virus, or Anti-Spam
services are enabled.
In the Network names(SSID) field, click the arrow to select
a wireless network.
If the network is secure, enter a password. Depending on
the security type, you might need to enter the user name.
To Next Page
Loading...
