Chore-TronicsĀ® 3 Breeder Edition Control Control Setup
MT2484A
21
Output Setup Egg Room (Relative Humidity and Temp) Cooler and Humidity
1.In the Setup/Outputs/Equipped and Number screen, under the Ventilation tab check Egg Room.
2.In the Setup/Outputs/Ventilation screen select the Egg Room button.
3.Enter the Relay numbers for the Cool, Heat and Humidifier.
Outputs and Temperatures Screen/Egg Room Tab
1.This column lists the "on" temperatures of the outputs listed.
2.This column lists the "off" temperatures for the cool and heat outputs of the Egg Room only.
3.Set Desired target temperature of the Egg Room.
4.Humidifier-Humidity range at which the Egg Room's humidifier will operate.