To Next PageTo Next Page
Need help?Do you have a question about the Chore-Time Tronics 3 and is the answer not in the manual?
General| Brand | Chore-Time |
|---|---|
| Model | Tronics 3 |
| Category | Control Unit |
| Language | English |
Explains the manual's purpose and scope for controlling the climate.
Highlights critical safety warnings and precautions for equipment use.
Details the meaning of safety decals placed on the equipment.
Specific warning about electrocution risks and safety measures.
Introduction to configuring analog sensor inputs for the system.
Steps to configure the Egg Room Relative Humidity sensor.
Steps to configure the Egg Room Temperature sensor.
Assigning temperature sensor inputs to analog channels.
Setting up load cells for feed bins, including board and input selection.
Calibrating the BinTrac system with the Chore-Tronics control.
Specific calibration steps for BinTrac load cells using dip switches.
Detailed calibration process for the Chore-Tronics control system.
Instructions for setting up Chore-Time load cells.
Steps for calibrating load cells for accurate weight readings.
Introduction to digital input configuration and types.
Wiring instructions for dump scales connected to digital inputs.
Setting up mechanical scales for inventory or other purposes.
Setting up and configuring egg counters for tracking egg production.
Accessing and using the Clocks tab for timed output control.
Configuring the timed events for female feed delivery.
Configuring the timed events for female water delivery.
Configuring the timed events for male water delivery.
Configuring the timed events for feeder fill operations.
Configuring the timed events for feed winch operation.
Mentions setup for Light, Spare, and PDS clocks.
Illustrative examples for configuring the feeding system matrix.
Configuring the timed events for feed delivery schedules.
Configuring the timed events for female water delivery.
Configuring the timed events for feeder fill operations.
Configuring the timed events for feed winch operation.
Configuring the timed events for weigh fill operation.
Entering and managing mortality data for females and males.
Overview of total eggs collected from various sources.
Inputting details for collected eggs, including culled and double yolk.
Steps for manually counting eggs when an egg counter is not used.
Inputting details for eggs found on the floor.
Viewing historical environmental sensor readings for temperature and humidity.
Viewing historical production metrics over time.
Accessing feeder fill history data by day or week.
Diagram illustrating the wiring for the BinTrac system integration.
Wiring diagram for the backup egg room cooler system.
Wiring diagram for the backup egg room humidifier system.
Diagram for connecting Chore-Time load cells to the system.
Diagram for integrating scales with the control system.
Instructions for wiring the optional Relative Humidity sensor.
Instructions for wiring temperature sensors to analog inputs.
Setting up alarms for egg room temperature and humidity conditions.
Alerts for unmet feed presets during feeder fill operations.
Display of real-time operational data, including feed consumption.
Configuring tunnel fan behavior and temperature control during feeding.
Table detailing bin capacities, fill volumes, and weight conversions.
