Chore-Time Tronics 3 - Female Water Clock Setup; Male Water Clock Setup; Feeder Fill Clock Setup

Control Setup Chore-Tronics® 3 Breeder Edition Control
16
MT2484A
Female Water Clock
In the Setup/Outputs/Clock/Female Water Screen...
1.Select the Relay or Relays from the drop-downs.
2.Rename if needed.
Male Water Clock
Set up for the Male Water Clock is the same as for the Female Water Clock.
Feeder Fill Clock
In the Setup/Outputs/Clock/Feeder Fill Screen enter....
1.The Relay or Relays from the dropdown.
2.Select the Scale type from the dropdown
3.Select the scale number from the dropdown
4.Rename if needed.
Note: Follow the same steps to setup all Feeder Fill Clocks. Caution! Do not allow Weigh Fill and Feeder
Fill Times to Overlap.
2
1
1
4
2
3