Chore-Time Tronics 3 User Manual

Chore-Tronics® 3 Breeder Edition Control Control Setup
MT2484A
31
Feeder Fill
1.Select Feed.
2.Select from the dropdown the Feeder Fill you what to view.
3.Select from the Tabs at the bottom of the screen to select Mech. Scales, Load Cells, Dump Scales or Feed
line Run Times History.
Day/Week
1.Select to toggle from week to day information
2.Actual amount of Feed delivered for a given week/day.
3.Daily Preset for a given week/day.
The History for Mech.Scales, Load Cells and Dump Scales are in the same format as the Feeder
Fill.
The Feed Line Screen is in the same format with the exception it displays the run times of the Feed
Lines if applicable.
2
3
1
2 3
2
3
11
Note:

Chore-Time Tronics 3 Specifications

General

Brand	Chore-Time
Model	Tronics 3
Category	Control Unit
Language	English