5
Introduction
The intelliTRACE Supervisory Control is designed to
monitor and manage multiple Chromalox intelliTRACE
Control Panels. Each “Panel” must be either a Chro-
malox IntelliTRACE Base Panel or a Base Panel with
a single Extension Panel. (When a base panel is cou-
pled with an extension panel, this is often referred to as
an intelliTRACE “System”). Each Panel (or “System”)
must be comprised of 6 - 72 circuits. This includes the
ITAS, ITLS, ITASC1D2 and ITLSC1D2 heat trace con-
trol panel platforms, including the Extension panel ver-
sions.
intelliTRACE provides efficient and secure remote
monitoring and parameter value management of hun-
dreds to thousands of individual heat trace circuits.
intelliTRACE is available as a downloadable PC Soft-
ware program or it may be embedded in an Industrial
PC for either ordinary or hazardous areas.
Alarm indication throughout your entire system is vis-
ible from 5 separate user-defined levels. From the
highest “Corporate” level down to the individual cir-
cuit level, intelliTRACE provides the user with 100%
system-wide monitoring and alarm status at all times.
Local system monitoring and management is per-
formed through the touch screen computer which su-
pervises each individual intelliTRACE control panel
system. System wide remote access is available at any
control station on your network. Additionally, the intel-
liTRACE software package provides the owner with
peace of mind with its electronic email of alarm events.
The intelliTRACE supervisory control is extremely ef-
ficient to set up and manage. Intuitive Windows based
system screens and global application of mass pa-
rameter value settings will have your system commis-
sioned in minutes, not hours. Navigation to any intel-
liTRACE control panel system is accomplished via 1
to 3 mouse clicks within intelliTRACE while individual
circuit detail within each panel system is simply one
more click away.
intelliTRACE Features:
• Offered as either an Industrial PC for both Ordinary
or Hazardous areas or as a Software Program on
your Personal Computer (See PC Requirements
Section)
• Effective Visual Alarm Status Hierarchy Tree
• Fully Customizable System Identification
• 5 Discrete System Location Monitoring Levels
• Intuitive Windows Based System Screens
• Global Application of Parameter Settings
• Efficient Navigation to all Circuits Within All Systems
• Local and Remote Alarm Indication
• ModBus RTU/RS485 or ModBus/TCP (Ethernet)
Communication
• Full Alarm & Monitoring Capabilities on GFEP, Tem-
perature, Sensor, Current Load & Communications
• Electronic Notification (via Email) of Alarm Events
• Multiple Level Security Password Protection
• Individual Circuit Enable/Disable Capability
• Proprietary Soft Start Algorithm
• Facilitates All intelliTRACE Control Panel Function-
ality
To Next Page
Loading...
Need help?
General
