(22) Remove (3) bolts on front engine mount
bracket (aluminum) (Fig. 32).
(23) Remove lower starter bolt (Fig. 33).
(24) Remove rear transaxle mount bracket (Fig.
34).
(25) Remove transaxle to rear lateral bending
strut from engine and transaxle (Fig. 35).
(26) Remove lower dust shield screw.
(27) Support transaxle with a transmission jack.
(28) Rotate engine clockwise to gain access to
driveplate clutch bolts (Fig. 36). Remove driveplate
clutch bolts (Fig. 37).
(29) Remove lower transaxle to engine bellhousing
bolts (Fig. 38).
(30) Remove transaxle from vehicle.
INSTALLATION
(1) To install transaxle, reverse removal procedure.
(2) After installing transaxle, fill transaxle to bot-
tom of fill plug hole (vehicle level on hoist). Fill tran-
Fig. 32 Front Engine Mount Bracket (Aluminum)
Fig. 33 Starter Bolts
Fig. 34 Rear Transaxle Mount Bracket
Fig. 35 Bracket Removal
Fig. 36 Rotate Engine Clockwise
JA TRANSAXLE 21 - 11
REMOVAL AND INSTALLATION (Continued)
To Next Page
Loading...
