(23) Install the shift knob on the shifter (Fig. 144)
or (Fig. 146).
(24) Install rear carpeting.
(25) Install both rear door sill plate scuff moldings,
by snapping them onto rear door sills.
(26) Install lower rear seat cushion. Be sure lower
seat cushion is fully installed in retainers on floor
pan of vehicle.
PARKING BRAKE SHOES (WITH REAR DISC
BRAKES)
REMOVAL
(1) Remove disc brake caliper from adapter and
rotor (See Disc Brake Shoe Removal).
(2) Remove rotor from hub/bearing.
(3) Remove dust cap from hub/bearing.
(4) Remove hub/bearing rear retaining nut and
washer.
(5) Remove hub/bearing from knuckle.
(6) Remove hold down clip from rear park brake
shoe (Fig. 168).
(7) Turn park brake shoe adjuster wheel until
adjuster is at its shortest length.
(8) Remove the park brake shoe adjuster from the
park brake shoes (Fig. 169).
(9) Remove the lower return spring (Fig. 170)
between the park brake shoes.
(10) Pull the rear park brake shoe away from the
caliper adapter (Fig. 171). Remove the upper return
spring (Fig. 171) from between the park brake shoes.
(11) Remove the hold-down clip from the front
park brake shoe (Fig. 172). Then remove front park
brake shoe.
INSTALLATION
(1) Install front brake shoe and hold down clip
(Fig. 172).
(2) Install the rear park brake shoe and the park
brake shoe upper return spring (Fig. 171).
(3) Pull rear brake shoe over anchor block until
properly located on adapter.
(4) Install the park brake lower return spring (Fig.
170).
(5) Install the adjuster between the park brake
shoes. Adjuster must be installed with the star wheel
toward the rear of the vehicle (Fig. 169).
Fig. 167 Parking Brake Adjustment (Rear Disc
Brakes)
Fig. 168 Rear Park Brake Shoe Hold-Down Clip
Fig. 169 Park Brake Shoe Adjuster
JA BRAKES 5 - 57
REMOVAL AND INSTALLATION (Continued)
To Next Page
Loading...
