CHEMICAL CLEANING
One type of corrosion encountered with aluminum
cylinder heads is aluminum hydroxide deposits. Cor-
rosion products are carried to the radiator and depos-
ited when cooled off. They appear as dark grey when
wet and white when dry. This corrosion can be
removed with a two part cleaner (oxalic acid and
neutralizer) available in auto parts outlets. Follow
manufacturers directions for use.
ADJUSTMENTS
BELT TENSION GAUGE METHOD
For conventional belts and Poly-V belts, use belt
tensioning gauge Special Tool 7198 to obtain proper
belt tension.
Adjust the belt tension for a New or Used belt as
prescribed in the Belt Tension Chart.
SPECIFICATIONS
COOLING SYSTEM CAPACITY
TORQUE
DESCRIPTION TORQUE
A/C Condenser to Radiator
Fasteners .................5N·m(45in.lbs.)
Thermostat Housing 2.0/2.4L
Bolts .................12.5 N·m (110 in. lbs.)
Thermostat Housing 2.5L
Bolts ...................19N·m(168 in. lbs.)
Water Pump Mounting 2.0/2.4L
Bolts ...................12N·m(105 in. lbs.)
Water Pump Mounting 2.5L
Bolts ...................24N·m(205 in. lbs.)
Water Pump Inlet Tube to Block
Bolts ...................12N·m(105 in. lbs.)
Water Pump Inlet Pipe to Cylinder Head 2.5L
Fasteners ...............14N·m(123 in. lbs.)
Fan Module to Radiator
Fasteners .................7N·m(65in.lbs.)
Fan Motor to Shroud
Fasteners .................5N·m(45in.lbs.)
Transmission Oil Cooler Hose
Clamps ...................2N·m(18in.lbs.)
BELT TENSION CHART
ACCESSORY DRIVE
BELTS
GAUGE
2.0/2.4/2.5L ENGINES
Air Conditioning
Compressor &
Generator
New
Belt:
667 N (150 lbs.)
Used
Belt:
356 N (80 lbs.)
Power Steering Pump
New
Belt:
578 N (130 lbs.)
Used
Belt:
356 N (80 lbs.)
COOLING SYSTEM CAPACITY CHART
Engine 2.0L 2.4L 2.5L
COOLANT CAPACITY*
Liters 8.0 8.5 10.0
U.S. Qts. 8.5 9.0 10.5
*Includes Heater and Coolant Recovery System
7 - 32 COOLING SYSTEM JA
CLEANING AND INSPECTION (Continued)
To Next Page
Loading...
